Rotary Isolator Switch
£ 13.00
Ensure safe, compliant maintenance and emergency shutdown for your outdoor air-source or ground-source heat pump with this Weatherproof Rotary Isolator Switch. Engineered specifically for external HVAC and heat pump installations, this heavy-duty local isolator allows engineers to safely disconnect the electrical supply directly at the outdoor unit during servicing, commissioning, or fault-finding.
Housed in a rugged, UV-stabilised polycarbonate enclosure with a high ingress protection rating, it provides reliable, year-round protection against heavy rain, dust, and extreme temperatures.
Key Features & Benefits
-
Safe Local Isolation: Provides a clearly visible, positive mechanical break in the power supply right next to the outdoor heat pump unit, meeting BS 7671 (18th Edition Wiring Regulations) requirements for local maintenance isolation.
-
Lockable Off Position (LOTO): Features a padlockable rotary handle in the “OFF” position (accommodating up to three padlocks) to prevent accidental re-energisation while an engineer is working on the system.
-
Weatherproof & UV Resistant: Rated to IP65 / IP66 (confirm exact model rating), the sealed enclosure prevents water and dust ingress and resists cracking or fading in direct sunlight.
-
Installer-Friendly Enclosure: Generous internal wiring space with multiple threaded knockouts (typically M20 / M25 top and bottom) and earth terminals makes termination fast and tidy, even with heavier-gauge SWA (Steel Wire Armoured) cable.
-
Interlocked Cover Safety: The front cover is mechanically interlocked with the switch mechanism so it cannot be opened while the isolator is switched “ON”.
Technical Specifications
| Specification | Details |
| Current Rating | 20A / 25A / 32A / 40A (select exact model amp rating) |
| Poles | 2-Pole (Single-Phase) or 4-Pole (Three-Phase) |
| Ingress Protection | IP65 / IP66 Weatherproof |
| Enclosure Material | High-Impact UV-Stabilised Polycarbonate |
| Handle Type | Red/Yellow or Black/Grey Padlockable Rotary Handle |
| Cable Entries | M20 / M25 Threaded Knockouts (Top, Bottom & Rear) |
| Compliance | BS EN 60947-3 / BS 7671 Complian |
Customer Questions
Inner – 76.8cm L x 57cm W x 41.5cm H – Outer – 80cm L x 60cm W x 44.5cm H









