Insulated flexi 28mm x 1″ x 750mm Angled
£ 20.00
28mm x 1″ x 750mm Pre-Insulated Heat Pump Flexible Hoses (Pair)
Simplify your outdoor heat pump installation with these 28mm x 1″ x 750mm Pre-Insulated Flexible Hoses. Engineered specifically for air-source and ground-source heat pump systems, these heavy-duty flexible connectors absorb pump vibration, accommodate minor pipework misalignment, and eliminate the need for complex rigid pipework bends at the outdoor unit.
Supplied pre-lagged with thick, weather-resistant thermal insulation, they prevent heat loss, stop condensation build-up during cooling cycles, and provide reliable frost protection for exposed external pipework.
Key Features & Benefits
-
Pre-Insulated for Maximum Efficiency: Factory-fitted closed-cell thermal insulation reduces heat loss between the heat pump and the building envelope while resisting UV rays, moisture, and frost.
-
Acoustic & Vibration Isolation: Flexible EPDM rubber core isolates compressor and pump vibrations, preventing noise transfer into internal heating pipework.
-
Full-Flow Performance: Large internal bore maintains high flow rates with minimal pressure drop, protecting heat pump Coefficient of Performance (COP).
-
Fast, Hassle-Free Installation: Features a 1″ BSP female swivel nut (with sealing washer) for direct connection to standard heat pump flow/return ports, paired with a 28mm compression fitting (or plain copper tail—verify exact end type) for rapid connection to primary pipework.
-
Heavy-Duty Braided Exterior: Stainless-steel over-braid protects the inner liner against kinking, high pressure, and mechanical damage.
Technical Specifications
| Specification | Details |
| Length | 750mm |
| Connection 1 (Heat Pump Side) | 1″ BSP Female Swivel Nut (with EPDM Sealing Washer) |
| Connection 2 (Pipework Side) | 28mm Compression / Copper Tail (confirm fitting style) |
| Inner Liner | High-Temperature EPDM Rubber |
| Outer Braid | 304 Stainless Steel Wire Braid |
| Insulation | Pre-fitted Closed-Cell UV & Weather-Resistant Foam |
| Max Operating Temperature | -20°C to +90°C (Suitable for heating, DHW & cooling modes) |
| Max Working Pressure | 6 – 10 Bar |
Customer Questions
Inner – 76.8cm L x 57cm W x 41.5cm H – Outer – 80cm L x 60cm W x 44.5cm H
Related products
-

Volumiser / Intermediate vessel
£ 55.00 – £ 120.00Price range: £ 55.00 through £ 120.00 Select options This product has multiple variants. The options may be chosen on the product page -

3 Bar Safety Relief Valve
£ 13.50 Add to cart -

Straight Tundish Open 15mm x 22mm Compression
£ 7.00 Add to cart -

28mm 3 Port Zone Valve with 3Core Cable
£ 55.00 Add to cart





